Add options into application that accommodates En13480 table A.2 specification for all fittings per En10253 requirements to define pressure factors to be applied to fittings of Type A and wall thickness requirements of fittings of Type B. Add opti...

Piping Stress, Pipe Support, and Foundation load generation require different analysis conditions using different seismic loads to meet differing code requirements. Currently, this is difficult to manage in the same autopipe file as users may have...

Add manufacturer library to select for SIF's to populate to meet B31.J as per B31.3 2020

As a subsea engineer using AutoPipe for modelling spools and jumpers, it is frustrating and misleading that AutoPipe does not account automatically for external pressure in all codes.

Does any means exist to enter multiple ambient temperatures for piping? For example: Case 1: Header with tie-in valve operating at 375F. Will fit up proposed piping at 70F to tie-in valve in hot position. After tie-in valve is open header remains ...

You currently only have 1 place to input the Wind shape factor and this is applied to all pipes but the value is different for each diameter in Accordance with AS1170.2. This value could be input in the pipe properties for individual pipe sizes, t...

Pls add option in the pipe support "Support" data, column to allow users option to check mark pipe support node points where spring rate/stiffness are provided. (Note: for spring types, default will have the check-mark activated). For example, usi...

Currently, there is no option to analyze transportational vibrations on a pipe line when it is being shipping to a different location, specially for skid mounted piping. This allows users to identify shipping supports which can be removed after th...

As AutoPipe limited node to 10000 only, for bigger model we model part of the system and we need to apply boundary conditions at the discontinuous node, if it is defined as anchor and apply node displacement (for thermal growth) this fictitious an...

Currently The Loads > Steam Relief > Steam Relief command enables the user to define the thrust loads at steam exit points due to a discharge through a safety relief valve. Add ability for program to analyze other gas & liquid relief val...