Working with existing or future segments in large systems, it would be great to have a option to change their segments plot (like adding transparency). Something similar to older software like Triflex (see attached image).

This is related to the limitation on the PCF Attribut Mapping tab. If we had the ability to map the PIPING-SPEC to a material then this issue would have been very easy to resolve.

When using AutoPIPE on laptop connected to a docking station or additional monitors, then removed to just using a laptop screen may cause the input / results grids to not be shown in the visible area. The grids are hidden out of screen view. Recom...

The allowable pressure of flanges as per EN1092-1 can be defined by formulas or by table. In the past AutoPipeVessel was giving the table allowable pressure. In the new version, it's the calculation with the allowable stress of the material. It wo...

The current max length of tags is 36 characters. Tag is meanwhile just about the only play where we can save some element-specific information. For example in the case of a Support I would like to save AT LEAST the following:1) The designation of ...

Sometimes is needed to increase locally the thickness of the vessel wall to reinforce the nozzles (under pressure load or external loads), instead of increasing the whole course or head thickness (for economic reasons). Simulating this local thick...

I would like to import a Caesar II model. However, I was not able to. I asked for Bentley's tech support help, but I was directed to look at 'Import a Caesar II Neutral (CII) File' from AutoPIPE's help. It is just a general guide. There were a few...

In the designing of tall structures, especially tall process columns, the use of DIN 18800 proved helpful. This must be notified though, that this standard is out of use, and has been superseded by EN 1993-1-6 for a while.Kindly please add this to...

Looking for an update to Import/Export the file from Auto-Pipe to UG-Nx or Vice versa. Currently there is no common format's available which will support both the software's.

In the case of sketch f) of table 4, the factor C can rise to 0.45 if s > 3 s1. Nowadays, there is no way to get C = 0.45 with the models of flat heads offered by Autopipe Vessel.