For V-stops and Hanger support types, the Support report prints global values as local values. Example, see attached image. Notice the Global axis direction is different from the indicated pipe's local axis direction. Next notice the support's Loc...

Add options into application that accommodates En13480 table A.2 specification for all fittings per En10253 requirements to define pressure factors to be applied to fittings of Type A and wall thickness requirements of fittings of Type B. Add opti...

Piping Stress, Pipe Support, and Foundation load generation require different analysis conditions using different seismic loads to meet differing code requirements. Currently, this is difficult to manage in the same autopipe file as users may have...

Kindly refer to the discussion in regard to the case no. CS0345238, regarding introducing autosave option after every 1 min or less. Similar feature is available in other stress analysis software can't same be availed in Auto PIPE as well, because...

When it comes to exporting pipe support loads from AutoPIPE to STAAD, PipeLINK is an effective tool. While PipeLINK has most of the necessary functionality, there is a lack in the ability to add a Design Margin to the pipe support loads sent from ...

This is to apply at nodes where support is not applied so the user can apply imposed discplacement regardless of support setting.

Add manufacturer library to select for SIF's to populate to meet B31.J as per B31.3 2020

On the configuration dialog, the user is given the option to select a number of different editions of AutoPIPE: Standard, Advanced, Nuclear. Suggest to grey out options that are not available to the account. Example: Account only has AutoPIPE Stan...

As a subsea engineer using AutoPipe for modelling spools and jumpers, it is frustrating and misleading that AutoPipe does not account automatically for external pressure in all codes.

Does any means exist to enter multiple ambient temperatures for piping? For example: Case 1: Header with tie-in valve operating at 375F. Will fit up proposed piping at 70F to tie-in valve in hot position. After tie-in valve is open header remains ...