Need to add an option to consider "as formed" and "annealed" bellow This will impact on following parameters and user can choose as per their requirements, ASME Km & Kg factor ASME factor 2.3 or 0.75 for Sy* EJMA Cm factor

管系应力分析计算时，经常需要设置固定支架，该支架承受垂直、水平、径向三个方向（即轴系中 xyz三向）的 力，且此处三向位移均约束 0。现有支架选项只能通过滑动支架+限位支架组合实现该功能。但是计算结果输出到路草支吊架软件时，会自动视别 为两个支架。

Does any means exist to enter multiple ambient temperatures for piping? For example: Case 1: Header with tie-in valve operating at 375F. Will fit up proposed piping at 70F to tie-in valve in hot position. After tie-in valve is open header remains ...

A tall vessel or column is normally designed with a particular liquid level. It would be very helpful if a new user case can be defined allowing to calculate full of liquid (which is not water, it is not the same as hydrotest).

We have noticed that the software systematically considers all jackets as type 2 in the jacket closure calculation following PD 5500. We need you to integrate the concept of type 1 jackets in the next version to facilitate support for this type of...

The Software calculate the fiber elongation according ASME SECTION VIII division 1 according UG-79. The term “t” is the nominal thickness for the component. For dished end it is only possible insert the minimum thickness and the calculation of the...

Adding an option to export the Code Stresses Color Graphics in .DGN format? The user can utilize this feature to present the code stresses in a more visual way during the Navisworks model walk-throughs with the clients.

Nodal displacement results in local axes would be immensely useful. I use AutoPIPE for onshore pipelines which are not straight & reviewing the displacement locally is often needed.

When using AutoPIPE or relating an output report to a model, users need to be able to clearly read the indicated text on screen / screen shot added into an report. This is not easy in congested areas with how AutoPIPE currently displays informatio...

You currently only have 1 place to input the Wind shape factor and this is applied to all pipes but the value is different for each diameter in Accordance with AS1170.2. This value could be input in the pipe properties for individual pipe sizes, t...