For V-stops and Hanger support types, the Support report prints global values as local values. Example, see attached image. Notice the Global axis direction is different from the indicated pipe's local axis direction. Next notice the support's Loc...

When it comes to exporting pipe support loads from AutoPIPE to STAAD, PipeLINK is an effective tool. While PipeLINK has most of the necessary functionality, there is a lack in the ability to add a Design Margin to the pipe support loads sent from ...

Adding an option to export the Code Stresses Color Graphics in .DGN format? The user can utilize this feature to present the code stresses in a more visual way during the Navisworks model walk-throughs with the clients.

Nodal displacement results in local axes would be immensely useful. I use AutoPIPE for onshore pipelines which are not straight & reviewing the displacement locally is often needed.

Open the results grids, select the support tab, and locate the columns for LocalDir1 - Gap3. Quick what does this refer to: pipe local axis, support local axis? Is this direction consistent across all of the support types (see attached image of Su...

Support the Component_GUIDs fields to be export, so that we can compare the entity with origin entity from other software.

Create button to uncheck print for load combinations that are inconsistent with the default load sequence.

When reviewing Model Consistency Check report, some warning messages will constantly appear regardless of addressing the warning. Example W726-10:  User SIF required at junction  at following point(s) Require a feature be added where reo...

Ansi/kellogs method is a widely used way to check flange joint, but different standard, or client specification could use different allowable. Now the ASME BPVC VII UG-44 suggest 2.2 for B16.5 #150 and 1.5 for most of the others; DNV suggested 1.5...

Modal Analysis Results to include Modes Normalized, the normalized result output would greatly help users locate which node points have the highest displacements where additional restraints could be needed to increase frequency at each mode results.