Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Showing 200 of 200

Allow load combination re-sorting or insert

In the load combination options, users can custom define loads. The combination ordering is specific to the entries - the rows at the bottom can use previous combinations above, but not v/v. AutoPIPE generates an error if a load case tries to refe...
9 months ago in AutoPIPE / UI 0 Future consideration

Enable different ambient temperatures for each thermal case

There is often need to calculate two conservative thermal combinations (lowest possible assembly temperature with highest working temperature and highest assembly temperature with lowest working temperature). Now it is needed to prepare two models...
almost 2 years ago in AutoPIPE / AutoPIPE Pipe Stress 3 Already exists

Dynamic interface between Autopipe and Openplant

Currently, the interface between Autopipe and Openplant is disconnected. Users have to manually export piping models to Autopipe, and perform analysis. If changes need to happen in one model, the other model isnt't updated dynamically. Further, th...
almost 2 years ago in AutoPIPE / AutoPIPE Pipe Stress 2 Future consideration

Insert 2 node points when a flange is inserted, to allow the user to set the BW SIF

By default, when you insert a WN or Lap Joint flange in Autopipe, it does not account for SIF at the BW joint. User has to enter an additional node point at a flange length and define a Joint Type with a defined offset. This could be automated.
almost 2 years ago in AutoPIPE / AutoPIPE Pipe Stress 0 Planned

Codap - Opening with pad according to C5.1.4b13

Nozzles design: Please provide an opction that considers the alternative calculation method when there is an insert forged pad
about 1 year ago in AutoPIPE Vessel 0 Needs review

Generate AutoCAD drawings by DOS command or batch file

Generating drawings by DOS command or batch file can save the time to open .emvd files and many clicks in UI if I have multiple files to process. AutoPIPE Vessel data (.emvd) have been completed. For example, 10 .emvd files have been completed. Sp...
9 months ago in AutoPIPE Vessel 0 Needs review

Modal Analysis Results to include Modes Normalized

Modal Analysis Results to include Modes Normalized, the normalized result output would greatly help users locate which node points have the highest displacements where additional restraints could be needed to increase frequency at each mode results.
5 months ago in AutoPIPE / Reporting 4 Already exists

DXF & DNG export - Add extra informaiton layers

For the DXF and DGN export add new layers for Support Tag No. Anchor Tag No. Pipe Identifier Valve Tag No. Flange Tag No. etc.
5 months ago in AutoPIPE / Reporting 0 Needs review

Update Coincident Node Check report to include Beam points

Currently, coincident node check report only returns results for pipes nodes that are within the specified tolerance distance to another pipe node point. Suggest report also include Beam points with specified tolerance distance of other Beam point...
5 months ago in AutoPIPE / Modelling 0 Needs review

Add capability to model 2 springs in series

Spring hanger arrangement, see attachment.
about 1 year ago in AutoPIPE / Modelling 0 Needs review