Add compressive stress calculation according to EN13445 16.14.8 instead of PD5500 when the calculation code is EN. Allow calculation to be selected manually. Also provide control on factors relevant to calculation such as Cx, Cbx, Q, Tolerance cla...

When API650 is not suitable for a vertical tank, calculation should be done with API620

This option is only available when floating head heat exchanger is calculated, for normal vessels it is not possible to use a crown (hemispherical) head welded direct into a flange without knuckle or straight flange.

Ensuring support info (gaps, friction, stiffness) is correct and reviewing support results are some of the more time consuming tasks. It would be very handy to be able to set up a library of support detail figure numbers with allowable load ratings.

Currently, AutoPIPE does not have the option to export reference loads to a .mdb file. I want to be able to easily compare the Reference Loads to their allowable. This is most handy when you have radial nozzles. Please include the allowable loads ...

In the case of horizontal vessels, it must be possible to lock both sadles in order to carry out a correct calculation under transport conditions (taking into account longitudinal acceleration on both sadles).

It should be possible to impose a weld bead dimension in the "brackets and lifting accessories" masks. This value is set at 0.7 x the minimum thickness of the shell or wear plate. In the case of large thicknesses, this results in an unfeasible wel...

Please add the following features to AutoPIPE's Model Explorer: 1st approver 2nd approver Seismic code - indicate all in model to be selected Wind type - indicate all in model to be selected wave type - indicate all in model to be selected Materia...

In the load combination options, users can custom define loads. The combination ordering is specific to the entries - the rows at the bottom can use previous combinations above, but not v/v. AutoPIPE generates an error if a load case tries to refe...

When creating stress isometric drawings, my team typically exports a .dxf file of the AutoPIPE Model. We are only concerned with nodes that represent support locations, however, there is no option to export only support nodes. Having this option a...