In the European Union we design wind loads acc. to EN 1991-1-4 (Wind), hence it would be nice if wind loads are implemented as in other pipe stress analysis programs.

Ensuring support info (gaps, friction, stiffness) is correct and reviewing support results are some of the more time consuming tasks. It would be very handy to be able to set up a library of support detail figure numbers with allowable load ratings.

Currently, AutoPIPE does not have the option to export reference loads to a .mdb file. I want to be able to easily compare the Reference Loads to their allowable. This is most handy when you have radial nozzles. Please include the allowable loads ...

When using AutoPIPE with multiple monitors, there are several scenarios in which a window positions will get messed up. One example is the interactive results box will sometimes become very tall, with the results still shown at the top and then bl...

The allowable pressure of flanges as per EN1092-1 can be defined by formulas or by table. In the past AutoPipeVessel was giving the table allowable pressure. In the new version, it's the calculation with the allowable stress of the material. It wo...

I use Auto pipe to run stress analysis, and I always write a report summarizing the results. I always include screenshots of the restraint and supports reactions. The concentrated forces are necessary to include in the calculations, but for the sc...

When using AutoPIPE on laptop connected to a docking station or additional monitors, then removed to just using a laptop screen may cause the input / results grids to not be shown in the visible area. The grids are hidden out of screen view. Recom...

Support the Component_GUIDs fields to be export, so that we can compare the entity with origin entity from other software.

As AutoPipe limited node to 10000 only, for bigger model we model part of the system and we need to apply boundary conditions at the discontinuous node, if it is defined as anchor and apply node displacement (for thermal growth) this fictitious an...

Create button to uncheck print for load combinations that are inconsistent with the default load sequence.