Nowadays, for corrosion in the saddle bolts be considered, you have to mark "corroded weight" (see https://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__wiki/69792/26-why-corrosion-allowance-is-not-taking-in-conside...

I noticed that Autopipe uses a limited amount of computer power. In a time-history analysis with a modal frequency of 400hz on a relatively small model it took about 30min using only 6 to 9% of the computer's processing power. An improvement in pr...

As an example, ASME B31.1 (2020) - section "102.3.2 Limits for Sustained Stresses and Displacement Stress Ranges" - para (b) Displacement Stresses provides the equation 1A for calculation of allowable stress range. Review the definition of Sc and ...

I want to customize the output report items for an automation process. I'm building the system by ntl file. The dat file can customize them but the ntl file cannot.

Requesting the contour style of the general stress. Not only code stress but general stress. We need a visual image with a stress contour to evaluate general stress qualitatively.

Add the ability to group a selection of segments to be easily selected

Users cannot change the size of cut-short symbol. The cut-short symbol is drawn proportional to the pipe OD while in single line mode. It sometimes looks too big or too small.

It would be very handy for AutoPIPE to report the maximum loading for all load cases for reporting to the structural engineer or equipment manufacturers.

When exporting a file to a DGN, one can easily click a button to transpose the model from Y up to Z up. It would be very handy if this could be done in the AutoPIPE model itself. Then one could simply click a button to change a file from Y up to Z...

When using nonlinear analysis earthquake loads cannot be scaled. If additional analysis sets are required with different earthquake accelerations for design purposes, it is severely limiting to have only 30 E cases. There are 100 analysis sets, it...