Input the material for wear plate different from the Lug – Lifting Lugs There are so many cases that the wear plate of the lugs can be different from the material of the lug. Best regards

There are so many cases that the wear plate of the saddles can be different from the material of the saddles. For example for a stainless steel equipment it is normal to add a saddles in carbon steel. However to make the transition between the bot...

At the moment it is not possible to add the value for corrosion allowance for saddles, brackets, legs or skirt. This requirements is common in a project specifications. At the moment is possible to add corrosion allowance but only for bolts. Best ...

According to clause 9.7.2.4, when an opening is located within the 0.8De region of a dished end but close to its boundary (i.e., near the De/10 distance from the knuckle), the reinforcement area may be insufficient if the calculation is limited to...

ASME NM.3.3-2020 has Nonmetallic Material Properties (Maximum Allowable Stress Values for thermoplastic (CPVC, PEX, PE, PVC, PVDF), Yield Strength Values, Thermal Expansion Coefficients, Moduli of Elasticity, Poisson's Ratio. This will allow the s...

At the moment, specific gravity is entered under Pipe Properties and cannot be changed for different pressure/temperature load cases. If there are different load cases, where a section of the model may be filled with water in Case 1 but filled wit...

The TEMA 11th Edition was released in 2023, but it has not yet been integrated into AutoPIPE Vessel. I kindly request that this feature be added at the earliest opportunity.

It would help users trying to extract maximum loads from the floating loads window if it included a copy to clipboard button which copied the loads, directions and load case to the clipboard. Currently, users have to manually type this and this ca...

When saving APC files, the code/non-code combinations get reset to default by AutoPIPE. User has to go though an extra step of re-importing the relevant .CMB file after saving the APC file. If there is a way to have AutoPIPE maintain the already s...

Adding an option to export the Maximum Code Stresses Color Graphics in .DGN format. The user can utilize this feature to present the code stresses in a more visual way in Navisworks.